Kingcutca630drivers [WORK]
Download File ---> https://shoxet.com/2ty88P
How to Install and Use Kingcut CA630 Vinyl Cutter
Kingcut CA630 is a professional vinyl cutter that can perform contour cutting, offline operation, high pressure and speed, and accurate cutting. It comes with a floor stand and a USB driver port for work without a PC. You can use it to make stickers, shirt vinyl, templates, plots, and more. In this article, I will show you how to install and use Kingcut CA630 vinyl cutter with different software options.
Step 1: Connect the Vinyl Cutter to Your PC
The first step is to connect the vinyl cutter to your PC using the USB cable. Make sure your PC has a USB port that supports USB 2.0 or higher. You can also use a COM port if your PC has one. If you want to use the offline operation mode, you need to insert an SD card into the vinyl cutter's SD card slot.
Step 2: Install the Drivers and Software
The next step is to install the drivers and software for your vinyl cutter. Depending on your software option, you may need to download them from the internet or use a disk that comes with the vinyl cutter. Here are some of the software options you can choose from:
Artcut 2009: This is a Windows-based software that supports Windows XP-10. You can use it to design and cut your graphics. It also supports contour cutting with a laser red dot. You can install it from the disk that comes with the vinyl cutter or download it from https://www.artcutsoftware.com/. To set up Artcut 2009 with Kingcut CA630, you can follow this video guide: https://www.youtube.com/watchv=8EDk5uMWpx8 [^1^].
Sign Master Cut + ARMS: This is a Windows-based software that supports Windows 7-10. You can use it to design and cut your graphics. It also supports contour cutting with automatic registration mark sensor (ARMS). You can install it from the disk that comes with the vinyl cutter or download it from https://signmaster.software/. To set up Sign Master Cut + ARMS with Kingcut CA630, you can follow this video guide: https://www.youtube.com/watchv=wDAg0fwkHj8 [^3^].
CutStudio for Windows & Mac: This is a cross-platform software that supports Windows and Mac OS. You can use it to design and cut your graphics. It also supports contour cutting with a laser red dot. You can download it from https://www.rolanddga.com/support/by-product/cutstudio. To set up CutStudio with Kingcut CA630, you can follow this user manual: https://static1.squarespace.com/static/5c6f4f6b4d546e6c9f7b7b3c/t/5c7f4e9c419202b7e0f0e3d7/1551849884526/CutStudio+User+Manual.pdf.
Flexi Cloud: This is a Windows-based software that supports Windows 7-10. You can use it to design and cut your graphics online or offline. It also supports contour cutting with ARMS. You can install it from the disk that comes with the vinyl cutter or download it from https://www.thinksai.com/products/flexi 061ffe29dd